Single Scan Data Format Change - Honeywell Voyager 1202G-BF User Manual

Single Scan Data Format Change

You can also switch between data formats for a single scan. The next bar code is scanned using an alternate data format,
then reverts to the format you have selected above (either Primary, 1, 2, or 3).
For example, you may have set your device to the data format you saved as Data Format 3. You can switch to Data Format
1 for a single button press by scanning the following Single Scan-Data Format 1 bar code. The next bar code that is
scanned uses Data Format 1, then reverts back to Data Format 3.
Single Scan-Primary
Data Format
Single Scan-Data Format 2
7 - 12
Single Scan-Data Format 1
Single Scan-Data Format 3