Rs485; Opos Mode - Honeywell Voyager 1202G-BF User Manual

RS485

Scan one of the following "Plug and Play" codes to program the scanner for an IBM POS terminal interface.
Note: After scanning one of these codes, you must power cycle the cash register.
IBM Port 5B Interface
IBM Port 17 Interface
Each bar code above also programs the following suffixes for each symbology:
* Suffixes programmed for Code 128 with IBM 4683 Port 5B, IBM 4683 Port 9B HHBCR-1, and IBM 4683 Port 17 Interfaces
**Suffixes programmed for Code 128 with IBM 4683 Port 9 HHBCR-2 Interface

OPOS Mode

The following bar code configures your scanner for OPOS (OLE for Retail Point of Sale) by modifying the following OPOS-
related settings:
Option
Interface
Baud Rate
RS232 Handshaking Flow Control, No Timeout
Data Bits, Stop Bits,
and Parity
Prefix/Suffix
Intercharacter Delay
2 - 2
Symbology Suffix
EAN 8 0C
EAN 13 16
UPC A 0D
UPC E 0A
Setting
RS232
38400
XON/XOFF Off
ACK/NAK Off
8 Data, 1 Stop, Parity None
Clear All Prefixes and Suffixes
Add Code ID and AIM ID Prefix
Add CR Suffix
Off
Symbology Suffix
Code 39 00 0A 0B
Interleaved 2 of 5 00 0D 0B
Code 128 * 00 0A 0B
Code 128 ** 00 18 0B
IBM Port 9B
HHBCR-1 Interface
IBM Port 9B
HHBCR-2 Interface