Alarm Duration; Using The Scanner With Bluetooth Devices; Minimizing Bluetooth/Ism Band Network Activity; Auto Reconnect Mode - Honeywell Voyager 1202G-BF User Manual

The sounds are as follows:

Alarm Duration

To set the length of time you want the Out-of-Range alarm to sound, scan the following bar code and then set the time-out
duration (from 0-3000 seconds) by scanning digits on the
Default = 1 sec.

Using the Scanner with Bluetooth Devices

The scanner can only be used with the CCB00-010BT-01N-BF base.

Minimizing Bluetooth/ISM Band Network Activity

The following settings can help you customize the relinking behavior of the cordless system to obtain the best compromise
between convenience and low interference.
Note: ISM band refers to the 2.4 to 2.48 GHz frequency band used by wireless networks, cordless phones, and Bluetooth.

Auto Reconnect Mode

Auto Reconnect controls whether or not the scanner automatically begins the relink process when a loss of connection is
detected. When the Auto Reconnect On bar code is scanned, the scanner begins the relink process immediately, without
user intervention. Default = Auto Reconnect On.
* Auto Reconnect On
4 - 8
Setting Sound
0 3 long beeps, medium pitch
1 3 long beeps, high pitch
Scanner Alarm Type
Programming Chart
Scanner Alarm Duration
inside the back cover, then scanning Save.
Auto Reconnect Off