Wincor Nixdorf Beetle™ Terminal Default Settings - Honeywell Vuquest 3310g User Manual

Wincor Nixdorf Beetle™ Terminal
Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor
Nixdorf Beetle terminal. Communication using 115200bps, no parity bit, 8
data bits and 1 stop bit. The following prefixes are programmed for each
symbology:
Symbology
Code 128
Code 93
Codabar
UPC-A
UPC-E
EAN-8
Note: If you are having unexpected results with this programming code,
scan the Activate Defaults bar code on
programming code above.
2 - 8
Prefix
K EAN-13
L GS1-128
N Interleaved 2 of 5
A0 Straight 2 of 5 IATA
C All other bar codes
B
Wincor Nixdorf Beetle Settings
Symbology
page 1-5
Prefix
A
P
I
H
M
first, then scan the