Line 1 And Line 2 Settings (Phone Port1 And Phone2) - Cisco SPA112 Administration Manual

Configuring the Voice Settings

Line 1 and Line 2 Settings (PHONE Port1 and PHONE2)

Line 1 and Line 2 Settings (PHONE Port1 and PHONE2)
NOTE
Cisco SPA100Series Administration Guide
Field
Force G722 Code
Use the Voice > Line 1 and Voice > Line 2 pages to configure the settings for
calls through the PHONE 1 and PHONE2 ports.
or Line 2 Enter the settings as described below. After making changes, click
Submit to save your settings, or click Cancel to redisplay the page with the saved
settings.
In a configuration profile, the FXS parameters must be appended with the
appropriate numeral (for example, [1] or [2]) to identify the port to which the setting
applies.
Line Enable
Field
Line Enable
Streaming Audio Server (SAS)
Field
SAS Enable
Description
Dial prefix to make G.722 the only codec that can be used
for the call.
Default setting: *02722
Description
To enable this line for service, select yes. Otherwise,
select no.
Default setting: yes
Description
To enable the use of the line as a streaming audio source,
select yes. Otherwise, select no. If enabled, the line cannot
be used for outgoing calls. Instead, it auto-answers
incoming calls and streams audio RTP packets to the
caller.
Default setting: no
4
83