Cisco SPA112 Administration Manual page 96

Configuring the Voice Settings
Line 1 and Line 2 Settings (PHONE Port1 and PHONE2)
Cisco SPA100Series Administration Guide
Field
Feature Dial Serv
Service
Announcement
Serv
Reuse CID
Number As Name
Audio Configuration
Field
G729a Enable
Silence Supp
Enable
G726-32 Enable
Silence Threshold
FAX V21 Detect
Enable
Echo Canc Enable
FAX CNG Detect
Enable
Description
Enable Feature Dial Service. See the Feature Dial Services
Codes parameter For more information.
Default setting: yes
Enable Service Announcement Service.
Default setting: no
Use the Caller ID number as the caller name.
Default settings: yes
Description
To enable the use of the G.729a codec at 8 kbps, select
yes. Otherwise, select no.
Default setting: yes
To enable silence suppression so that silent audio frames
are not transmitted, select yes. Otherwise, select no.
Default setting: no
To enable the use of the G.726 codec at 32 kbps, select
yes. Otherwise, select no.
Default setting: yes
Select the appropriate setting for the threshold: high,
medium, or low.
Default setting: medium
To enable detection of V21 fax tones, select yes.
Otherwise, select no.
Default setting: yes
To enable the use of the echo canceller, select yes.
Otherwise, select no.
Default setting: yes
To enable detection of the fax Calling Tone (CNG), select
yes. Otherwise, select no.
Default setting: yes
4
95