Cisco SPA112 Administration Manual page 105

Configuring the Voice Settings
User 1 and User 2
Cisco SPA100Series Administration Guide
Field
Media Loopback
Mode
Media Loopback
Type
Distinctive Ring Settings
Field
Ring1 - 8 Caller
Ring Settings
Field
Default Ring
Default CWT
Hold Reminder
Ring
Call Back Ring
Description
The loopback mode to assume locally when making call to
request media loopback. Choices are: Source and Mirror.
Default setting: source
NOTE If the ATA answers the call, the mode is determined
by the caller.
The loopback type to use when making call to request
media loopback operation. Choices are Media and Packet.
Default setting: media
Note that if the ATA answers the call, then the loopback
type is determined by the caller (the ATA always picks the
first loopback type in the offer if it contains multiple type)
Description
Caller number pattern to play Distinctive Ring/CWT 1, 2, 3,
4, 5, 6, 7, or 8. Caller number patterns are matched from
Ring 1 to Ring 8. The first match (not the closest match)
will be used for alerting the subscriber. The distinctive
rings are set on the Regional
Default setting: blank
Description
Default ringing pattern, 1–8, for all callers.
Default setting: 1
Default CWT pattern, 1–8, for all callers.
Default setting: 1
Ring pattern for reminder of a holding call when the phone
is on-hook.
Default setting: 8
Ring pattern for call back notification.
Default setting: 7
page.
4
104