Line 1 And Line 2 Settings (Phone1 And Phone2) - Cisco SPA112 Administration Manual

Configuring Voice
Configuring Voice Settings
NOTE
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Feature Invocation
Method

Line 1 and Line 2 Settings (PHONE1 and PHONE2)

Use the Voice > Line 1 and Voice > Line 2 pages to configure the settings for
voice services through the PHONE1 and PHONE2 ports.
To open this page: Click Voice on the menu bar, and then click Line 1 or Line 2 in
the navigation tree.
In a configuration profile, the FXS parameters must be appended with the
appropriate numeral (for example, [1] or [2]) to identify the port to which the setting
applies.
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to abandon any unsaved entries.
Line Enable
Field
Line Enable
Network Settings
Field
SIP ToS/DiffServ Value
SIP CoS Value [0-7]
RTP ToS/DiffServ Value
RTP CoS Value [0- 7]
Description
Select the method you want to use, Default or Sweden
default. Default setting: Default.
Description
To enable this line for service, select yes.
Otherwise, select no. Default setting: Yes
Description
TOS/DiffServ field value in UDP IP packets
carrying a SIP message. Default setting: 0x68.
CoS value for SIP messages. Default setting: 3.
ToS/DiffServ field value in UDP IP packets
carrying RTP data. Default setting: 0xb8.
CoS value for RTP data. Default setting: 6.
4
90