Quick Setup For Voice Over Ip Service - Cisco SPA112 Administration Manual

Quick Setup for Voice over IP Service

NOTE
STEP 1
STEP 2
Cisco SPA100 Series Administration Guide
The Quick Setup page is displayed automatically when you first log on ATA. You
can use this page to quickly configure connectivity to your provider's Voice over IP
network for your analog phones.
Connecting to your service provider's network requires Internet connectivity. With
the default network settings, your ATA should have Internet connectivity when you
connect a cable from the WAN port of the ATA to a port on your router or broadband
network device. For more information, see
For Line 1 and Line 2, specify the settings for the phone services to be used by a
analog (FXS) phones or fax machines that are connected to the PHONE1 and
PHONE2 ports.
• Proxy: Enter the domain name or URL of the service provider's proxy server.
• Display Name: Enter the name that you want to use to identify your account.
This name typically is used as your Caller ID name.
• User ID: Enter the user ID that is required to log in to your Internet account.
• Password: Enter the password that is required to log in to your Internet
account.
• Dial Plan in (Line section only): Keep the default settings (recommended) or
edit the dial plan to suit your site. For more information, see
Plans, page 138.
Click Submit to save your settings. The voice service will restart.
Internet Settings, page
2
26.
Configuring Dial
23