Cisco SPA112 Administration Manual page 110

Administration Settings
Management
Cisco SPA100Series Administration Guide
Cisco SPA122 Web Access fields
Field
Admin Access
Web Utility Access
Cisco SPA122 Remote Access fields
Field
Remote
Management
Description
This feature controls access to the configuration utility
from devices that are connected via the ETHERNET
(LAN) port.
Click Enabled to enable this feature, or click Disabled to
disable it. The default setting is Enabled. If you
administer and configure the ATA from a computer that
is connected to the LAN, this feature must be enabled.
Select the protocol to use for access to the
configuration utility from a device on the WAN. Choose
HTTP and/or HTTPS. For secure Internet access, select
HTTPS. The default value is HTTP.
Description
Allows access to the configuration utility from a device
that is on the WAN side of the ATA. For example, you
could connect from another subnet in your office or from
your home computer.
Click Enabled to enable this feature, or click Disabled to
disable it. The default setting is Disabled. The other
fields in this section of the page are available only if you
enable this feature.
If you attempt to enable this feature while using the
default administrator login credentials, you will be
prompted to change the credentials. Click OK to
acknowledge the warning message. Use the
Administration > Management > User List page to
change administrator password. For more information,
see User List (Password Management), page
5
113.
108