Cisco SPA112 Administration Manual page 95

Configuring the Voice Settings
Line 1 and Line 2 Settings (PHONE Port1 and PHONE2)
Cisco SPA100Series Administration Guide
Field
Call Redial Serv
Call Back Serv
Three Way Call
Serv
Three Way Conf
Serv
Attn Transfer Serv
Unattn Transfer
Serv
MWI Serv
VMWI Serv
Speed Dial Serv
Secure Call Serv
Referral Serv
Description
Enable Call Redial Service.
Enable Call Back Service.
Enable Three Way Calling Service. Three Way Calling is
required for Three Way Conference and Attended
Transfer.
Default setting: yes
Enable Three Way Conference Service. Three Way
Conference is required for Attended Transfer.
Default setting: yes
Enable Attended Call Transfer Service. Three Way
Conference is required for Attended Transfer.
Default setting: yes
Enable Unattended (Blind) Call Transfer Service.
Default setting: yes
Enable MWI Service. MWI is available only if a Voice Mail
Service is set-up in the deployment.
Default setting: yes
Enable VMWI Service (FSK)
Default setting: yes
Enable Speed Dial Service.
Default setting: yes
Secure Call Service. If this feature is enabled, a user can
make a secure call by entering an activation code (*18 by
default) before dialing the target number. Then audio
traffic in both directions is encrypted for the duration of
the call.
Default setting: yes
Star codes are set in
To enable secure calling by default, without requiring a
star code, set the user's Secure Call Setting to yes. See
User 1 and User 2, page
Enable Referral Service. See the Referral Services Codes
parameter For more information.
Default setting: yes
Vertical Service Activation
100.
4
Codes.
94