Cisco SPA112 Administration Manual page 65

Configuring the Voice Settings
Provisioning
Cisco SPA100Series Administration Guide
Field
Profile Rule B:
Profile Rule C:
Profile Rule D
Log Resync
Request Msg
Log Resync
Success Msg
Log Resync Failure
Msg
Report Rule
Description
Defines second, third, and fourth resync commands and
associated profile URLs. These profile scripts are
executed sequentially after the primary Profile Rule
resync operation has completed. If a resync is triggered
and Profile Rule is blank, Profile Rule B, C, and D are still
evaluated and executed.
Default setting: blank
This parameter contains the message that is sent to the
Syslog server at the start of a resync attempt.
Default setting: $PN $MAC -- Requesting resync
$SCHEME://$SERVIP:$PORT$PATH
Syslog message issued upon successful completion of a
resync attempt.
Default setting: $PN $MAC -- Successful resync
$SCHEME://$SERVIP:$PORT$PATH
Syslog message issued after a failed resync attempt.
Default setting: $PN $MAC -- Resync failed: $ERR
The target URL to which configuration reports are sent.
This parameter has the same syntax as the Profile_Rule
parameter, and resolves to a TCP/IP command with an
associated URL.
A configuration report is generated in response to an
authenticated SIP NOTIFY message, with Event: report.
The report is an XML file containing the name and value of
all the device parameters.
This parameter may optionally contain an encryption key.
For example:
[ --key $K ] tftp://ps.callhome.net/$MA/rep.xml.enc
Default setting: blank
4
64