Cisco SPA112 Administration Manual page 56

Configuring the Voice Settings
SIP
Cisco SPA100Series Administration Guide
Response Status Code Handling
Field
SIT1 RSC
SIT2 RSC
SIT3 RSC
SIT4 RSC
Try Backup RSC
Retry Reg RSC
RTP Parameters
Field
RTP Port Min
Description
SIP response status code for the appropriate Special
Information Tone (SIT) For example, if you set the SIT1
RSC to 404, when the user makes a call and a failure code
of 404 is returned, the SIT1 tone is played. Reorder or
Busy tone is played by default for all unsuccessful
response status code for SIT 1 RSC through SIT 4 RSC.
Default setting: blank
SIP response status code to INVITE on which to play the
SIT2 Tone.
Default setting: blank
SIP response status code to INVITE on which to play the
SIT3 Tone.
Default setting: blank
SIP response status code to INVITE on which to play the
SIT4 Tone.
Default setting: blank
SIP response code that retries a backup server for the
current request.
Default setting: blank
Interval to wait before the ATA retries registration after
failing during the last registration.
Default setting: blank
Description
Minimum port number for RTP transmission and reception.
The RTP Port Min and RTP Port Max parameters should
define a range that contains at least 4 even number ports,
such as 100 –106.
Default setting: 16384.
4
55