User List (Password Management); Bonjour - Cisco SPA112 Administration Manual

Administration Settings
Management
STEP 1
STEP 2
STEP 3
Cisco SPA100Series Administration Guide

User List (Password Management)

Use the Administration > Management > User List page to manage the two user
accounts for the configuration utility. The administrator-level account has the
default username admin and password admin. The user-level account has access
to modify a limited set of features. This account has the default username cisco
and password cisco.
For the IVR, no user password is required; the user simply presses # when
prompted. The default administrator password is 1234#. You can configure these
passwords on the System
To update a password:
In the User List table, click the pencil icon for the account that you want to update.
On the User Account page, enter the username and password, as described
below.
• Username: Enter a username.
• Old Password (administrator account only): Enter the existing password.
The default administrator password is admin. The default guest password is
cisco.
• New Password: Enter up to 32 characters for your new password.
• Confirm New Password: Enter the new password again, to confirm.
After making changes, click Submit to save your settings, or click Cancel to
redisplay the page with the saved settings.

Bonjour

Use the Administration > Management > Bonjour page to enable or disable
Bonjour. Bonjour is a service discovery protocol that locates network devices such
as computers and servers on your LAN. It may be required by network
management systems that you use. When this feature is enabled, the ATA
periodically multicasts Bonjour service records to its entire local network to
advertise its existence.
Click Enabled to enable this feature, or click Disabled to disable it. The default
setting is Enabled. After making changes, click Submit to save your settings, or
click Cancel to redisplay the page with the saved settings.
page.
5
113