Cisco SPA112 Administration Manual page 100

Configuring the Voice Settings
Line 1 and Line 2 Settings (PHONE Port1 and PHONE2)
Cisco SPA100Series Administration Guide
*1xxxxxxxxxx<:@fwdnat.pulver.com:5082;uid=jsmith;pwd=xy z
Example 2:
*1xxxxxxxxxx<:@fwd.pulver.com;nat;uid=jsmith;pwd=xyz
The syntax for a dial plan expression is described in the table below.
Dial Plan Entry
*xx
[3469]11
0
00
[2-9]xxxxxx
1xxx[2-9]xxxxxx
xxxxxxxxxxxx.
FXS Port Polarity Configuration
Field
Idle Polarity
Caller Conn
Polarity
Callee Conn
Polarity
Functionality
Allow arbitrary 2 digit star code
Allow x11 sequences
Operator
Int'l Operator
US local number
US 1 + 10-digit long distance number
Everything else
Description
Polarity before a call is connected: Forward or Reverse.
Default setting: Forward
Polarity after an outbound call is connected: Forward or
Reverse.
Default setting: Forward.
Polarity after an inbound call is connected: Forward or
Reverse.
Default setting: Forward
4
99