Cisco SPA112 Administration Manual page 112

Administration Settings
Management
Cisco SPA100Series Administration Guide
TR-069
Use the Administration > Management > TR-069 page to configure
communication with an Auto-Configuration Server (ACS) via TR-069 CPE WAN
Management Protocol (CWMP). TR-069 (Technical Report 069) provides a
common platform to manage all voice devices and other customer-premises
equipment (CPE) in large-scale deployments. It provides the communication
between the CPE and the ACS.
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to redisplay the page with the saved settings.
Field
Status
ACS URL
ACS Username
ACS Password
Connection Request
Port
Connection Request
Username
Connection Request
Password
Periodic Inform
Interval
Description
Click Enabled to enable remote provisioning, or click
Disabled to disable this feature. The default setting is
Disabled.
The URL for the ACS. The format should be http(s)://
xxx.xxx.xxx.xxx:port or xxx.xxx.xxx.xxx:port. The
xxx.xxx.xxx.xxx is the domain name or IP address of the
ACS server. Both the IP address and the port number
are required.
The username for the ACS. The default username is the
Organization Unit Identifier (OUI). This value is required
and must match the username configured on the ACS.
The password for the ACS. This value is required and
must match the password configured on the ACS.
The port to use for connection requests
The username for connection requests. This value must
match the Connection Request Username configured on
the ACS.
The password for connection requests. This value must
match the Connection Request Password configured on
the ACS.
If Periodic Inform is enabled, the duration, in seconds,
between CPE attempts to connect to the ACS. The
default value is 86400 seconds.
5
110