Rip Configuration - Draytek Vigor2960 series User Manual

3. Click Add to open the following dialog.
Available parameters are listed as follows:
Item
Profile
IP Address
MAC
Apply
Cancel
4. Enter all the settings and click Apply.
5. A new profile has been added onto Bind Table.
4 . 2 . 5 R I P C o n f
4 . 2 . 5 R I P C o n f
The Routing Information Protocol (RIP) is a dynamic routing protocol used in local
and wide area networks. The routing information packet will be sent out by web
server or router periodically, and can be used to communicate with other routers. It
will calculate the number of network nodes on the route to ensure there is no
obstruction on the network routine. In addition, it will choose a correct route based
on the method of Distance Vector Routing and use the Bellman-Ford algorithm to
calculate the routing table.
Vigor2960 Series User's Guide
Description
Type the name of the profile.
Type the IP address that will be used for the specified MAC
address.
Type the MAC address that is used to bind with the assigned
IP address.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
i g u r a t i o n
i g u r a t i o n
87