Draytek Vigor2960 series User Manual page 108

Enable This Profile
WAN Profile
Private IP
Private IP subnet
Mask
Protocol
Use IP Alias
IP Alias
Apply
Cancel
4. Enter all the settings and click Apply.
5. A new profile has been added onto Address Mapping table.
Check the box to enable the Address Mapping profile.
Choose a WAN profile for such entry.
Type the private IP used for this entry.
Type the subnet mask used for this entry.
Choose the protocol used for the entry.
Click Enable to invoke IP Alias function.
IP alias that can be selected and used for port redirection.
Before using it, please go to WAN>>General Setup and
enable the wan1 profile. Add several IP addresses under
Static mode for wan1.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
100 Vigor2960 Series User's Guide