Draytek Vigor2960 series User Manual page 189

WAN Profile
Local IP/Subnet
Mask
Local Next Hop
Remote Host
Remote IP / Subnet
Mask
More Remote
Subnet
Local GRE IP
Remote GRE IP
5. Fill in the required information on this page and click Finish. Later, a new profile has
been created.
Vigor2960 Series User's Guide
data will be authenticated but not be encrypted.
Choose a wan profile to be used by such profile.
Type the IP address and subnet mask of local host.
Specify the gateway for WAN interface. Usually, use the
default setting (leave it in blank).
Type the WAN IP address for the remote host.
Type the LAN IP address and LAN subnet mask for the
remote host.
Add more remote subnet in this field if required.
The virtual IP address of the router, specified for this tunnel.
The virtual IP address of the remote client, specified for this
tunnel.
181