Draytek Vigor2960 series User Manual page 65

Source IP Address
Source Mask
Destination IP
Address
Destination Mask
Destination Port
Start
Destination Port
End
Load Balance Pool
/WAN Profile
Apply
Cancel
4. Enter all the settings and click Apply. The new rule profile will be added on the screen.
Vigor2960 Series User's Guide
Type a WAN IP address here as the source IP address for
such rule.
– Click the icon to clear the IP setting.
Use the drop down list on the right to choose a suitable mask
for the source.
Type a WAN IP address here as the destination IP address
for such rule.
– Click the icon to clear the IP setting.
Use the drop down list on the right to choose a suitable mask
for the destination.
Type a value as the destination port starting for such rule.
Type a value as the destination port ending for such rule.
Choose one of the profiles to be used by such rule. In which,
wan1 to wan5 profiles are configured in default. In addition,
profiles configured in WAN>>Load Balance Policy>> Pool
page also will be displayed here.
To have user-defined WAN profile, please refer to
WAN<<General Setup for detailed information.
Click it to save the configuration.
Click it to return to the factory setting.
57