Draytek Vigor2960 series User Manual page 192

Certificate
Presared Key
Security Protocol
WAN Profile
Local IP / Subnet
Mask
Local Next Hop
Remote Host
Remote IP/Subnet
Mask
More Remote
Subnet
Local GRE IP
Remote GRE IP
Previous
Finish
Cancel
However, if you choose PPTP as the Type, then you will get the following screen:
Choose a local certificate from the drop down list.
Type a pre-shared key for authentication if PSK is selected
as Auth Type.
Choose ESP to specify the IPSec protocol for the
Encapsulating Security Payload protocol. The data will be
encrypted and authenticated. Choose AH to specify the
IPSec protocol for the Authentication Header protocol. The
data will be authenticated but not be encrypted.
Choose a wan profile to be used by such profile.
Type the IP address and subnet mask of local host.
Specify the gateway for WAN interface. Usually, use the
default setting (leave it in blank).
Type the WAN IP address for the remote host.
Type the LAN IP address and LAN subnet mask for the
remote host.
Add more remote subnet in this field if required.
The virtual IP address of the router, specified for this tunnel.
The virtual IP address of the remote client, specified for this
tunnel.
Back to the previous page.
Save the configuration and return to the home page of such
function.
Cancel the configuration and return to the home page of such
function.
184 Vigor2960 Series User's Guide