Draytek Vigor2960 series User Manual page 94

Edit
Delete
Select All
Refresh
Refresh
Bind Table
Profile
IP Address
MAC
H o w t o c o n f i g u r e
H o w t o c o n f i g u r e
1. Open LAN>>Bind IP to MAC.
2. Use the drop down Mode menu to specify a suitable mode.
There are three modes offered for you to choose.
Disable – The function of Bind IP to MAC is disabled.
Enable – Specified IP addresses on the Bind Table will be reserved for the device with
bind MAC address. Other devices which are not listed on the Bind Table shall still get
the IP address from DHCP server.
Strict_Bind – Only specified IP addresses will be assigned to the device with bind
MAC address. Other devices which are not listed on the Bind Table shall still NOT get
the IP address from DHCP server.
It allows you to edit and modify the selected IP address and
MAC address that you create before.
You can remove any item listed in IP Bind List. Simply
click and select the one, and click Delete. The selected item
will be removed from the IP Bind List.
Choose all of the selections at one time.
It is used to refresh the ARP table. When there is one new
PC added to the LAN, you can click this link to obtain the
newly ARP table information.
Renew current web page.
It displays a list for the IP bind to MAC information.
Display the name of the profile.
Display the IP address specified for the profile.
Display the MAC address specified for the profile.
B i n d I P t o M A C
B i n d I P t o M A C
86 Vigor2960 Series User's Guide