Draytek Vigor2960 series User Manual page 191

Available parameters are listed as follows:
Item
Type
VPN Settings Via
Profile Name
Next
Cancel
2. Fill in the required information on this page and click Next. If you choose IPSec as the
Type, you will get the following screen:
Available parameters are listed as follows:
Item
Profile
Enable This Profile
Auth Type
Vigor2960 Series User's Guide
Description
Specify which protocol (PPTP or IPSec) will be used for
such VPN profile.
Select From Current Settings - Current VPN LAN to LAN
profiles will be listed below such setting. Choose the one
you need.
Create New VPN Profile – It allows you to create a new
VPN LAN to LAN profile. Simply type the name in the field
of Profile Name. The field of Profile Name is available only
when you click this setting.
Type a new name for such profile.
Go to next page.
Cancel the configuration and return to the home page of such
function.
Description
Display the name of such profile.
Check this box to enable such profile.
The authentication to be used by Pre-Shared Key or RSA
Signature. Choose PSK or RSA for such profile.
183