Draytek Vigor2960 series User Manual page 119

Available parameters are listed as follows:
Item
Profile
Enable This Profile
Time Profile
Source IP
Exception IP
IM Block
P2P Block
Protocol Block
Apply
Cancel
4. Enter all the settings and click Apply.
5. A new Application filter profile has been added.
Vigor2960 Series User's Guide
Description
Type the name of the Application filter profile.
Check the box to enable this profile.
Choose a schedule profile to be applied on such rule.
You can click to create another new time object profile.
Choose one or more IP object profiles from the drop down
list. The selected profile will be treated as source IP.
You can click to create another new IP object profile.
Choose one or more IP object profiles from the drop down
list. The selected profile will be treated as exception IP
which will not be filtered by the router for such group.
You can click to create another new IP object profile.
Choose one or more IM object profiles from the drop down
list which will not be allowed to pass through the router.
You can click to create another new IM object profile.
Choose one or more P2P object profiles from the drop down
list which will not be allowed to pass through the router.
You can click to create another new P2P object profile.
Choose one or more Protocol object profiles from the drop
down list which will not be allowed to pass through the
router.
You can click to create another new protocol object
profile.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
111