Draytek Vigor2960 series User Manual page 45

Description
VLAN ID
VLAN Tag
Port
IPv4 Protocol Type
IPv6 Protocol Type
H o w t o
H o w t o
1. Open WAN>>General Setup. Choose WAN1 or WAN2 profile and click the Edit
button to open the following dialog. Only the tab of the protocol specified in IPv4
Protocol field will be available for you to modify. If you want to change and specify
another connection mode for such WAN profile, remember to choose the mode from
the drop down list of IPv4 Protocol.
Available parameters for global configuration are listed as follows:
Item
Profile
Enable This Profile
Description
VLAN ID
VLAN Tag
Vigor2960 Series User's Guide
means enabled.
Display a brief explanation for such profile.
Display the VLAN ID of the profile.
If the data transmitted with tag, Enable will be displayed in
this field. Otherwise, Disable will be shown instead.
Display the physical WAN interface for such profile.
Display the IPv4 protocol selected by the profile.
Display the IPv6 protocol selected by the profile.
e d i t t h e W A N p r o f
e d i t t h e W A N p r o f
Description
Type a name for such profile.
Check this box to enable such profile.
Give the brief description for such profile.
Type the VLAN ID number for such profile.
Enable – Click it to enable the function of VLAN Tag. Data
transmitted through the router will not be tagged with any
number.
Disable – Click it to disable the function of VLAN Tag.
Data transmitted through the router will be tagged with
specified number for identification.
i l e
i l e
37