Draytek Vigor2960 series User Manual page 253

Available parameters are listed as follows:
Item
Profile
Start IP
End IP
TX Limit
RX Limit
Apply
Cancel
4. Enter all the settings and click Apply.
5. A bandwidth limit profile has been created.
Vigor2960 Series User's Guide
Description
Type the name of the profile.
Define the start IP address for limit bandwidth.
Define the end IP address for limit bandwidth.
Define the limitation for the speed of the upstream. If you do
not set the limit in this field, the system will use the default
speed for the specific limitation you set for each index. Do
not type the value with "0", otherwise the profile cannot be
saved.
Define the limitation for the speed of the downstream. If you
do not set the limit in this field, the system will use the
default speed for the specific limitation you set for each
index. Do not type the value with "0", otherwise the profile
cannot be saved.
Click it to save the configuration and exit the dialog.
Click it to exit the dialog without saving the configuration.
245