Draytek Vigor2960 series User Manual page 113

3. The following dialog will appear.
Available parameters are listed as follows:
Item
Group
Enable This Profile
Comment
Apply
Cancel
4. Enter all the settings and click Apply.
5. A new filter group has been added onto Address Mapping table.
6. Choose the IP filter group first and then click the Add tab (the lower one in this page).
Vigor2960 Series User's Guide
Description
Type the name of the IP filter group.
Check the box to enable this profile.
Give a brief description for the profile.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
105