Draytek Vigor2960 series User Manual page 46

Port
Default MAC
Address
Mode
IPv4 Protocol Type
IPv6 Protocol Type
Apply
Cancel
Global configuration allows you to enable the profile, give a brief explanation for such
profile, specify the VLAN ID, specify MAC address, choose IPv4 and IPv6 protocol,
and specify the mode of the data transmission (NAT or Routing).
Display the physical WAN interface for such profile.
Enable – Click it to enable the default MAC address for
such profile.
Disable – Click it to type the MAC address manually for
such profile.
MAC Address - Specify the MAC address for such profile if
you click Disable for Default MAC address. In default, the
system will determine it automatically.
Determine such profile will be used for NAT or routing.
There are four connection modes for you to specify for IPv4
protocol type. Each mode will bring up different web page.
There are four connection modes for you to specify for IPv6
protocol type. Each mode will bring up different web page.
Click it to save the configuration and exit the dialog.
Click it to exit the dialog without saving the configuration.
38 Vigor2960 Series User's Guide