Draytek Vigor2960 series User Manual page 80

Available parameters are listed as follows:
Item
Profile
Enable This Profile
Start IP
End IP
DNS
Apply
Cancel
3. When you finish the above settings, please click Apply to save the configuration and
exit the dialog.
4. The LAN profile has been edited.
Description
Display the name of the LAN profile.
Check this box to enable this profile.
Set the starting IP address of the IP address pool for DHCP
server. The format the IP address shall be similar to the
following example:
2000:0000:0000:0000:0000:0000:0000:10 or 2000::10.
Set the ending IP address of the IP address pool for DHCP
server. The format the IP address shall be similar to the
following example:
2000:0000:0000:0000:0000:0000:0000:10 or 2000::10.
Set the private IP address for DNS server. If this field is
blank, users on LAN will treat Vigor2960 as the DNS server.
Add – Click it to add a new IP address for DNS server.
Save – Click it to save the setting.
– click the icon to remove the selected entry.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
72 Vigor2960 Series User's Guide