Draytek Vigor2960 series User Manual page 133

3. The following dialog will appear.
Available parameters are listed as follows:
Item
Group Name
Interface
Description
Objects
Apply
Cancel
4. Enter all the settings and click Apply.
Vigor2960 Series User's Guide
Description
Type the name of the object group. The number of the
characters allowed to be typed here is 20.
Determine the category (any, source or destination) of this IP
object. If an IP object is set to Source, it will only appear in
the field of Source IP on Firewall>>IP Filter Rule.
Make a brief explanation for such profile if the group name
is set not clearly.
Use the drop down list to check the IP object profiles under
such group.
All the available IP objects that you have added on Objects
Setting>>IP Object will be seen here.
Click it to save the configuration.
Click it to exit the dialog without saving anything.
125