Ondt Function Block; Table 5-50 Ondt Dynamic Parameters; Table 5-51 Ondt Static Parameters - Honeywell UMC800 Reference Manual

5.41 ONDT Function Block

Description
The ONDT label stands for the On Delay Timer. This block is part of the Fast Logic category. It looks like
this graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
OUT 1 BOOL
RUN_RST 2 BOOL
Static Configuration Parameters:
Parameter Index
Delay 0
8/99

Table 5-50 ONDT Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
O W output
I R ON = run, OFF = reset

Table 5-51 ONDT Static Parameters

Type Description
REAL Delay Time (0 seconds, 0 to 9999.9)
RS232 Communications Reference Manual
Function Parameter Index Reference
83