Trig Function Block; Table 5-92 Trig Dynamic Parameters - Honeywell UMC800 Reference Manual

5.70 TRIG Function Block

Description
The TRIG label stands for Trigger or "One Shot" operation. This block is part of the Logic or Fast
Logic category. It looks like this graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
OUT 1 BOOL
X 2 BOOL
Static Configuration Parameters: None
8/99
OR

Table 5-92 TRIG Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
O R output
I R input
RS232 Communications Reference Manual
Function Parameter Index Reference
Fast Logic
125