Tpo Function Block; Table 5-89 Tpo Dynamic Parameters - Honeywell UMC800 Reference Manual

5.68 TPO Function Block

Description
The TPO label stands for Time Proportional Output. This block is part of the Loops category. It looks
like this graphically on the Control Builder.
Dynamic Parameters:
Parameter Index
status 0
IN 1
Static Configuration Parameters: None
8/99

Table 5-89 TPO Dynamic Parameters

Type Use R/W
REAL C R
REAL I R
RS232 Communications Reference Manual
Function Parameter Index Reference
Description
block status (see section 5.2 for code list)
analog input value (usually %)
121