Neg Function Block; Table 5-48 Neg Dynamic Parameters - Honeywell UMC800 Reference Manual

5.39 NEG Function Block

Description
The NEG label stands for Negate. This block is part of the Calculations category. It looks like this
graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
OUT 1 REAL
X 2 REAL
Static Configuration Parameters: None
8/99

Table 5-48 NEG Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
O R result
I R input
RS232 Communications Reference Manual
Function Parameter Index Reference
81