Mma Function Block; Table 5-43 Mma Dynamic Parameters - Honeywell UMC800 Reference Manual

5.35 MMA Function Block

Description
The MMA label stands for Min-Max-Average-Sum. This block is part of the Calculations category. It
looks like this graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
MIN 1 REAL
MAX 2 REAL
AVG 3 REAL
SUM 4 REAL
SDEV 5 REAL
ALM 6 BOOL
X1-X6 7-12 REAL
Static Configuration Parameters: None
8/99

Table 5-43 MMA Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
O R minimum input value
O R maximum input value
O R average of input values
O R sum of input values
O R standard deviation of inputs
O R deviation alarm
I R inputs
RS232 Communications Reference Manual
Function Parameter Index Reference
77