Xfr Function Block; Table 5-99 Xfr Dynamic Parameters; Table 5-100 Xfr Static Configuration Parameters - Honeywell UMC800 Reference Manual

Function Parameter Index Reference

5.75 XFR Function Block

Description
The XFR label stands for Bumpless Analog Transfer Switch. This block is part of the Signal Selectors
category. It looks like this graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
OUT 1 REAL
X 2 REAL
Y 3 REAL
SY 4 BOOL
Static Configuration Parameters:

Table 5-100 XFR Static Configuration Parameters

Parameter Index Type
xrate 0 REAL
yrate 1 REAL
130

Table 5-99 XFR Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
O R output
I R
I R
I R select Y when ON
Description
transfer to X rate (eu/min, >=0) {0 to 99999}
transfer to Y rate (eu/min, >=0) {0 to 99999}
RS232 Communications Reference Manual 8/99