Msf Function Block; Table 5-44 Msf Dynamic Parameters; Table 5-45 Msf Static Configuration Parameters - Honeywell UMC800 Reference Manual

Function Parameter Index Reference

5.36 MSF Function Block

Description
The MSF label stands for Mass Flow Calculation. This block is part of the Calculations category. It looks
like this graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
OUT 1 REAL
X 2 REAL
Y 3 REAL
Z 4 REAL
Static Configuration Parameters:

Table 5-45 MSF Static Configuration Parameters

Parameter Index Type
Kg 0 REAL
Kx 1 REAL
Ky 2 REAL
Kz 3 REAL
Bx 4 REAL
By 5 REAL
Bz 6 REAL
DROPOFF 7 REAL
78

Table 5-44 MSF Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
O R output
I R
I R
I R
Description
Orifice Constant {-99999 to 999999}
Delta Pressure Scaler {-99999 to 999999}
Pressure Scaler {-99999 to 999999}
Temperature Scaler {-99999 to 999999}
Pressure Bias {-99999 to 999999}
Delta Pressure Bias {-99999 to 999999}
Temperature Bias {-99999 to 999999}
low dropoff value (EU) {0 to 99999} [default 0]
RS232 Communications Reference Manual 8/99