Rcp Function Block; Table 5-62 Rcp Dynamic Parameters - Honeywell UMC800 Reference Manual

Function Parameter Index Reference

5.49 RCP Function Block

Description
The RCP label stands for Recipe Selector. This block is part of the Setpoint Program category. It looks
like this graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
NUM 1 REAL
LOAD 2 BOOL
Static Configuration Parameters: None
94

Table 5-62 RCP Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
I R recipe number
I R load command
RS232 Communications Reference Manual 8/99