Wvar Function Block; Table 5-98 Wvar Dynamic Parameters - Honeywell UMC800 Reference Manual

5.74 WVAR Function Block

Description
The WVAR label stands for Write Variable. This block is part of the Auxiliary category. It looks like this
graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
X 1 REAL
or
BOOL
EN 2 BOOL
Static Configuration Parameters:
None
8/99

Table 5-98 WVAR Dynamic Parameters

Use R/W Description
C R block status
I R value to be written
I R enable change
RS232 Communications Reference Manual
Function Parameter Index Reference
129