Tahd Function Block; Rs232 Communications Reference Manual; Table 5-85 Tahd Dynamic Parameters - Honeywell UMC800 Reference Manual

Function Parameter Index Reference

5.65 TAHD Function Block

Description
The TAHD label stands for Track and Hold. This block is part of the Auxiliary category. It looks like this
graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
OUT 1 REAL
X 2 REAL
TC 3 BOOL
Static Configuration Parameters: None
118

Table 5-85 TAHD Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
O R output
I R primary input
I R track command

RS232 Communications Reference Manual

8/99