Ao Function Block; Table 5-14 Ao Dynamic Parameters - Honeywell UMC800 Reference Manual

Function Parameter Index Reference

5.11 AO Function Block

Description
The AO label stands for Analog Output. This block is part of the Loops category. It looks like this
graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
IN (X) 1 REAL
Static Configuration Parameters: None
48

Table 5-14 AO Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
I R analog input value (eu)
RS232 Communications Reference Manual 8/99