Honeywell UMC800 Reference Manual page 60

Function Parameter Index Reference
BAD_BLOCK 18
RUNMODE 20
PRGMODE 21
MIN_PER_TICK 26
CODE_REV 28
REALTIME_OFF 30
*Valid for only control block execution cycle after power-up.
Static Configuration Parameters: None.
50
BOOL O R
BOOL C R
BOOL C R
REAL C R
REAL C R
REAL O R
RS232 Communications Reference Manual
ON = one or more blocks have bad status
ON = run mode is active
ON = program mode is active
minutes per OS tick
code revision number
Number of seconds the controller was powered down.*
8/99