Chapter 5 Operating The Rf Modulator - Cisco GoQAM Installation And Operation Manual

4004834 Rev D
5 Chapter 5
Operating the RF Modulator
Introduction
This chapter contains procedures for viewing and changing GoQAM
RF settings, descriptions of screens and messages, and instructions for
performing routine maintenance.
Note: Actual screen settings may differ slightly from the examples
presented in this guide.
In This Chapter

Understand the Boot Process .............................................................. 78

Change the Boot Mode ......................................................................... 81
 Read the Default Status Screen ........................................................... 83

Use the Front Panel Keys to Change Configuration Settings ......... 84
 Adjust the Frequencies of a Selected Carrier .................................... 86

Adjust the RF Output Level of a Selected Carrier ............................ 87

Mute the RF Output of a Selected Carrier ......................................... 88

Change the Carrier Mode of a Selected Carrier ................................ 89

Monitor Setup Options ........................................................................ 90

Change an RF Carrier Frequency ....................................................... 98

Resetting the GoQAM .......................................................................... 99
77