Cisco GoQAM Installation And Operation Manual page 142

Chapter 7 Inspect the Modulator
8 Remove and discard the blown fuse, and then replace the blown fuse with the
spare fuse.
9 Place a new fuse in the hidden compartment where you removed the spare. This
fuse will now be your spare fuse.
10 Insert the fuse holder into the back panel.
11 Choose one of the following options:

For the 120/230V AC model, snap the fuse holder in place.

For the 48V DC model, tighten the fuse holder by using a small flat-blade
screwdriver to turn the fuse holder clockwise.
12 Replace the power cord and power on the GoQAM.
126 4004834 Rev D