Cisco GoQAM Installation And Operation Manual page 83

11 To view or edit an RF Output Port, highlight a row and click Open. An RF
Output port similar to the following opens.
Note: For a description of the fields in the RF Output Port window, go to the RF
Output Ports section in Set Up UpConverter Basic Parameters (on page 68).
12 Did you make changes in the RF Output Port window?
 If yes, click Save.
 If no, click Cancel.
13 On the Set Up UpConverter window, click Apply. The system applies the
settings.
4004834 Rev D
Understand the Set Up UpConverter GUI
67