Cisco GoQAM Installation And Operation Manual page 77

Function Keys
The following function keys appear in the File Selection Dialog screen.
Key
OK
Filter
Cancel
Understanding Connectivity
The Connectivity fields of the Set Up GoQAM window allow you to specify the
input device connected to each of the input ports on the GoQAM.
Note: When you first provision the GoQAM, the Connectivity fields are accessible
only after you click Apply or Save from the Set Up GoQAM window.
To view the Connectivity fields while reading this section, click the Connectivity tab
in the Set Up GoQAM window.
The following diagram shows an example of the Connectivity fields within the
window.
Connectivity
The following table lists the Connectivity field descriptions.
Field
QAM Name
Port Number
Headend Name
Device Type
Device Name
Port
4004834 Rev D
Function
Places the selected file name into the Configuration File Name
field and closes the File Selection Dialog window
Enables the contents of the directory to display in the Directories
and Files fields
Closes the File Selection Dialog window without changing the
original settings
Description
Identifies the name of the selected GoQAM and allows
you to specify the Input Port (1 or 3)
Identifies the port number of the device that is connected
to the GoQAM. The server should be entered in the DNCS
as a generic MPEG source. Create as many ports as are
available for the server and connect to the GoQAM
Identifies the headend in which the input device exists
Identifies the type of input device, such as an IRT to which
the GoQAM is connected
Identifies the name of the input device to which the
GoQAM is connected
Identifies the port number of the device that is connected
to the IF GoQAM. The server should be entered as the
DNCS as a generic MPEG source. Create as many ports as
are available for the server and connect to the IF GoQAM.
Understand the Set Up IF GoQAM GUI
61