Cisco GoQAM Installation And Operation Manual page 75

Advanced Parameters
The following table lists Advanced Parameters field descriptions.
Field
Configuration File Name Displays the name of the configuration file used by
Select
Understanding the File Selection Dialog Screen
The File Selection Dialog screen allows you to specify the configuration file for the
GoQAM. To view the File Selection Dialog screen while reading this section, click
the Select button on the Advanced Parameters tab.
Understanding the BOOTP/TFTP Process
The BOOTP/TFTP process allows the GoQAM, after power on or reset, to request an
IP address and receive configuration parameters, application downloads, and
provisioning from the network BOOTP server. The DNCS, which is a BOOTP server,
uses a BOOTP reply to assign an IP address to the GoQAM if the unit is provisioned
in the DNCS database. The configuration file selected in the File Selection Dialog
window is included in the BOOTP reply. The GoQAM uses the information in the
configuration file to determine whether it is running the correct version of
application code. If the GoQAM is not running the correct version of application
code, it requests the correct image file from the DNCS.
4004834 Rev D
Description
the GoQAM to determine whether it is running the
correct version of application code
Opens the File Selection Dialog window so that you
can specify the configuration file for the selected
GoQAM. See File Selection Dialog Screen, next in
this section, for more information
Understand the Set Up IF GoQAM GUI
59