Back Panel Overview - Cisco GoQAM Installation And Operation Manual

Chapter 1 Introducing the GoQAM

Back Panel Overview

Back Panel Diagram
This illustration shows the back panel components for each type of GoQAM.
Back Panel Diagram
Back Panel Components
The following table describes the back panel components.
Back Panel Components
Important: The cooling fans for the GoQAM are mounted on the side panel.
Item Component
1 Power Switch
2 Fuse Holder
3 AC Power Inlet
4 RF OUT and
IF OUT Ports
5 Gigabit Ethernet Port
LEDs
12
Description
On/off rocker-type power switch
4.0 A SLO BLO 250 V fuse (Cisco part number 188106)
IEC 320-conductor grounded outlet
F-connectors for RF or IF output, 75 Ω
Note: The RF GoQAM uses only RF OUT ports 1 and 3.
Not used (disabled) in the Overlay solution
4004834 Rev D