Cisco GoQAM Installation And Operation Manual page 60

Chapter 3 Provision the RF GoQAM
Understanding Connectivity
The Connectivity fields of the Set Up RF GoQAM window allow you to specify the
input device connected to each of the Input ports on the GoQAM.
Note: When you first provision the RF GoQAM, the Connectivity fields are
accessible only after you click Apply or Save from the Set Up RF GOQAM window.
Thereafter, the Connectivity fields are accessible for viewing or modification.
To view the Connectivity fields while reading this section, click the Connectivity tab
in the Set Up RF GOQAM window.
The following diagram shows an example of the Connectivity fields of the Set Up RF
GOQAM window.
44 4004834 Rev D