Cisco GoQAM Installation And Operation Manual page 21

Feature
RF Version:
64/256 QAM RF
Output (2)
User Interface
Features
4004834 Rev D
Function
Provides a separate physical connector for each QAM output

(up to 2)
Allows independent level control for each QAM signal

 Allows an adjustable output center frequency range of
91 MHz to 869 MHz
Provides a switched filter bank for superior broadband

combined noise performance
Supports International Telecommunications Union (ITU) J.83

Annex-A, and Annex-B, and Annex-C standards
Allows local setting of RF power levels and display of diagnostic
and debug information through the front panel and user interface
System Overview
5